工程测量英文自我评价
工程测量英文自我评价如何写呢?我们一起来看一看:
工程测量英文自我评价写作方法:1、首先可以写自己在工作期间的表现或感谢公司给予的平台;2、然后可以写自己的工作总结以及工程测量工作中的注意事项;3、最后结尾部分可以写对自己未来的期望以及自己今后努力的方向。
工程测量英文自我评价篇一
First, we must have a good grasp of the basic theoretical knowledge Our internship is the root of the smooth success of our basic theoretical knowledge, our group of students learning achievement are good, usually more serious study, boys and girls are the first In our group, it is really great. Other students are also great, the use of the instrument is very correct and skilled, particularly serious about digital processing, and in strict accordance with the basic provisions, such as "the scope of the error limit, from the whole to the local, from the control to the Department of broken" and so on. In short, we usually work hard to learn is the basic guarantee for the smooth conduct of the internship.
Second, we must have the spirit of innovation, although we usually feel good learning, but to the hands-on practice, we began to really eat a little bit of the tiger - no way to start. However, we dare to practice, the courage to explore, the courage to innovate, and finally, we completed a copy of a homework. And our internship report miraculously from scratch, from less to more, from simple to complex and then complete, and ultimately become a perfect answer. I am proud of our spirit of being able to practice and be innovative. In the future work should make good use of this wealth!
Third, there must be realistic and pragmatic spirit In the first two days of measurement practice, we in order to speed up the progress of the work are very fast, there is no timely processing of data, the results to distance data, we found that we Of the data can not be used, however, we did not relax themselves, we all agreed to re-do, after repeated measurements, we finally got a reasonable data, pay a satisfactory job. I think we engaged in the structure of the people not only in the measurement must have the spirit of seeking truth and being pragmatic, engaged in any work should have the spirit of seeking truth and being pragmatic. The only way to do a qualified construction industry talent.
Fourth, the failure is the mother of success, practice makes perfect After a time of error, again and again retest, a second calculation, the operation of our instruments have been further improved, the speed of measurement is also faster and faster, accurate data Sex is getting higher and higher. This also thanks to a second failure, again and again to rally, time and again to practice. At the same time, failure also honed our will, the more rub Yong Yue.
5, the unity of the group - criticism - re-unity is very important group to give full play to the ______, but also the implementation of the ______ above the concentration. A person is not a panacea, depends on everyone, a person's knowledge can not be comprehensive, rely on the collective, a person is wrong is not terrible, to dare to expose errors in front of everyone to accept criticism. In the ongoing debate, we can find the problem, study the problem, solve the problem, the formation of the group the most correct views. This should be called on the basis of unity to dare to criticize, but also to work together for the purpose of it! Of course, the group's "unity and mutual assistance" would not have said it.
Six, the teacher's guidance is very important In practice, we inevitably have some problems can not be solved, then, thanks to Chen, Wang careful and patient guidance, we only enlightened, thinking and more open. We have such achievements first of all to thank our instructors - Chen and Wang.
工程测量英文自我评价篇二
This practice makes me deeply feel the difference between theory and practice, from now on, not only to seriously learn the theory of knowledge, but also to focus on strengthening the practical hands-on ability to make their own more comprehensive development of a comprehensive development of the project, . At the same time, engineering measurement is also a technical live, it needs to measure personnel seriously, careful, patient; team members should also work together, as far as possible in all aspects of measurement to maintain a high accuracy, the only way to efficiently complete our Of the measurement tasks.
In fact, this measurement makes me feel the deepest is the close cooperation between the players, measurement has just begun, we are a group of nine people is not clear division of labor, the results of measurement work was very slow, but we soon found Measurement work is included in all aspects, and we immediately assigned a good task, have defined their own work, such as: in the measurement of elevation, the need for two feet to help the staff in two turning points to help leveling, a classmate Responsible for adjusting the instrument and readings, and a student is responsible for correcting readings, record data, in addition, there is a student specifically responsible for data checking, so, in order to ensure that the measurement of the surveyor's work smoothly; another example: We divided into three groups, one group with a steel ruler, the other with a tape measure at the same time, there is a group responsible for processing data and drawing. In this way, we have a clear division of labor, unity and cooperation, and efficient completion of our measurement work.
In addition, the measurement work is complicated and complicated, including many details, such as selecting the datum point, marking, installing the instrument, adjusting the level, setting the level of the ruler, aiming at the target, recording data, processing the data and checking the error. So many details, to say which is more important, in fact, each aspect is very important, each step can not be errors, or it may retest, to bring unnecessary trouble measurement. To give an example: a vertical ruler, a central level of a circular level, when the ruler to try to bubble in the middle position, which is a technical live, you need to Mozhun the law can be fast and accurate to the standard foot righting , But can not arbitrarily put the ruler to the ground a stand, otherwise it will make the data deviation and need to re-test, delay measurement process. Therefore, the measurement must develop a serious and careful work attitude.
The measurement practice, but also let me understand the hardships of construction and measurement of the importance of the work. In order to ensure that internships can be completed on time, our group members get up almost at six o'clock every morning, arrive at the measuring location, place the instruments, then take turns to eat breakfast, and sometimes do not take a nap at noon , The afternoon until dark can not see the time Hou back to dinner, to stay later also stay up to the day of data processing, often to 12 o'clock in order to go to bed ... ... the whole week is so, we all Very hard. However, in my view, although a little tired, a little hard, this a few
Days is my most fulfilling days. Because in the past few days inside, I not only learned a lot of classroom learning not the measurement of knowledge, but also to develop some good habits, which for my future development will be of great help. Measurement practice is about to end, I will sum up the practice of this pros and cons, find their own shortcomings, and through future efforts to learn to make up for my shortcomings, prepare for the future career in order to achieve greatersuccess!
工程测量英文自我评价篇三
The two-week measurement internship has ended. Recalling the past few days of internships, although had to feel the essence of exhaustion, but we harvest a skill, but also gain a memorable experience.
Because measuring engineering is a very practical subject, measurement practice plays an important role in cultivating students' thinking and hands-on ability, mastering specific work procedures and contents. Although we measured in school, but the difficulty can not be compared with the field, our aim is to consolidate the textbook in the survey practice knowledge, to solve the remaining problems, found in learning deficiencies, to make up for missing knowledge points.
Every morning, we resist fatigue, put on the moon, carry instruments to practice place, at night, we organize the industry, mutual exchange, we are not afraid of hardship, unity and cooperation.
Through this internship I fully understand the importance of theory with practice, theoretical understanding does not mean that can be fully utilized in the actual operation of the process we have encountered many problems, but after our exploration, many have overcome, can not alone overcome, We have also been overcome by seeking the help of other students and teachers. It can be said that this practice is not only exercise the practical ability to consolidate the knowledge, but also to fully strengthen the students and students, students and the feelings between teachers. I believe that this internship will become an unforgettable memory of all of us in college life.
-
善良文案正能量(善良的文案)
1、善良是一种智慧,是一种远见,一种自信,一种精神力量,是一种文化,一种快乐。2、在对的时间,遇见对的人,是一生幸福;在对的时间,遇见错的人,是一场心伤;在错的时间,遇见错的人...
句子查看全文>> -
端午赛龙舟的场面描写 五月端午赛龙舟的句子
1、手捧粽子,缅怀离骚,龙舟竟渡,勇往直前!祝端阳节辛福安康!2、开心每一刻,平安每一天!3、愿你品尝出人生的美好,祝你健康,开心快乐到老。4、粒粒红枣心欢喜,滴滴雄黄吉祥意。...
句子查看全文>> -
电暖茶几怎么使用才安全
电暖茶几怎么使用才安全,让我们一起了解一下吧。1、调节空气湿度冬季是电暖茶几的使用旺季,不过由于冬季空气十分干燥,室内使用电暖桌会由于空气对流,而导致空气更加干燥,人体长期生活...
生活查看全文>> -
泡普洱茶用多少度的水泡多久
冲泡普洱茶的水温为100℃,水温低则滋味平淡,无法将内质析出,而100℃的水温,滋味与香气可得到最大程度的释放,冲泡前先准备8g普洱茶、一只盖碗,然后用开水把茶具烫洗一遍,将茶...
茶叶查看全文>> -
别克昂科威方向盘向左转动异响怎么回事
别克昂科威方向盘向左转动有异响可能是因为:1、转向管柱不润滑,摩擦力大。 2、检查转向助力油少了。 3、检查万向节是否有问题。 4、底盘悬挂平衡杆吊耳胶套老化变硬。 5、平面轴...
问答查看全文>>
推荐
- 1一问三不知指的是哪三不知364
- 2威朗雾灯装饰安装方法176
- 3励志女性名言481
- 4你好奔驰语音如何设置?159
- 5途锐采用的什么悬架141
- 6标致301油耗怎么样?152
- 7再见7月你好8月抖音最火文案(5月再见6月你好简单文案)387
- 8开瑞优翼油耗怎么样?162